Single Cylinder Two Stroke Petrol Engines Test Bench
Single Cylinder Two Stroke Petrol Engines Test Bench
SKU: HI MTE-014

The "HANSA" experimental test stand The engine is mounted on a vibration-insulated base plate and connected to the asynchronous motor. The mass of the base plate in conjunction with the soft bearing support ensures that the test stand runs very smoothly.The asynchronous motor is initially used to start the engine. As soon as the engine is running, the asynchronous motor and energy recovery unit act as a brake unit for applying a load to the engine. The braking power is fed back into the electrical system. In passive mode of the engine the asynchronous motor is also used to determine the frictional power of the engine.The lower section of the mobile frame contains fuel tanks and a stabilization tank for the intake air.The air consumption is measured by way of a measuring nozzle. The fuel consumption is measured by way of the level in a vertical pipe.Single Cylinder Two Stroke Petrol Engines Test BenchThe switch cabinet contains digital displays for the speed, torque and temperatures. Pressure gauges indicate negative intake pressure and air consumption. The measured values are transmitted directly to a PC via USB. The data acquisition software is included.FEATUREScontrol and load unit for single-cylinder internal combustion engines up to, 3 kWasynchronous motor used as load unit, also as starter motorvibration-insulated base plate for engine mountingplotting of torque and power curvesdetermination of specific fuel consumptiondetermination of volumetric efficiency and lambda (fuel-air ratio)determination of the frictional power of the engine (in passive mode)stabilisation tank for intake airmeasurement and display of torque, air temperature, air intake quantity, negative intake pressure, speed, fuel consumption, fuel temperaturemeasured value displays for engine: exhaust gas temperature and cooling water temperaturesSPECIFICATIONAsynchronous motor as brakepower output: approx. 3 kW at 2900min-1Measuring rangestorque: -50?50Nmtemperature: 0?900?Cspeed: 0?5000min-1fuel consumption: 50cm3/minengine intake pressure: -400?0mbarair consumption: 0?690L/h230V, 60Hz, 1 phases DIMENSIONS AND WEIGHT:L x W x H: 1200x 800x 1200mmWeight (approx.): 110kg

Terms & Conditions I Privacy Policy I copyright © Hansainstruments. All rights reserved