Steam Turbine Power Plant Setup
Steam Turbine Power Plant Setup
SKU: HI MTE-023

The "HANSA" experimental has been designed specifically for engineering education in the field of power plant technology, and driving and driven machines. It offers a wide range of experiments to learn about the operational processes in a steam power plant. An oil-fired once-through steam boiler produces wet steam that is turned into superheated steam by means of a super heater. The boiler?s short heat-up time means rapid steam generation is possible. Load is applied to the turbine with a generator. The turbine output is determined by speed and torque. Downstream of the turbine, the steam is condensed and returned to the boiler. The feed water circuit is fitted with a complete water treatment system, which consists of a re generable ion exchanger and chemical dosing. Sensors record the temperature, pressure, speed, and flow rate at all relevant points. The measured values can be read on digital displays. At the same time, the measured values can also be transmitted directly to a PC via USB. The data acquisition software is included. The control panel includes a clear process schematic of the plant. The system is monitored and controlled by a programmable logic controller (PLC).Steam Turbine Power Plant SetupThe experimental plant is built in accordance with statutory safety regulations and includes the mandatory safety facilities. The steam generator is type tested and does not require specific permissions.The plant can optionally be operated with the cooling tower.FEATURESsteam power plant and its componentsstart-up, operation and shut down of a steam power plantclosed steam-water circuit with feed water treatmentamong others, determining:boiler efficiencymechanical/thermal efficiency of the turbinecondenser efficiencyspecific fuel consumption of the plant SPECIFICATIONSteam generatorsteam output: 200kg/h at 11barfuel consumption: 12L/hheat-up time: 8minpressure: 13barSuper heaterpower: 7kWSingle-stage axial turbine with Curtis wheel and hydraulic speed regulatorpower: max. 1,5kW at 3000min-1Water-cooled condensercooling capacity: 98kWtransfer surface: 2,5m2Measuring rangestemperature: 9x 0?400?C, 2x 0?100?Cflow rate: 0?167L/min (cooling water)pressure: 3x 0?16bar, 1x ?1bartorque: 0?20Nmspeed: 0?4000min-1400V, 50Hz, 3 phases400V, 60Hz, 3 phases, 230V, 60Hz, 3 phases DIMENSIONS AND WEIGHTL x W x H: 3500x 2500 x 2250 mmWeight (approx.): 2250 KG

Terms & Conditions I Privacy Policy I copyright © Hansainstruments. All rights reserved